Car Care Solutions

PPF CARE FOR BEFORE AND AFTER INSTALLATION

Get the best protection from your STEK Paint Protection Film with our range of Pre-wash, Detailing and Maintenance solutions.

Three stages for the ultimate paint protection

  1. Pre Wash

  2. Detailing and Waterless Wash

  3. Coat and Maintain

Pre Wash

Pre-Wash

  • As a liquid, it binds contaminates, removing them more easily.

  • For severe contamination, use a combination of Pre-Wash and Foam Bath together.

  • Contamination that cannot be removed with a Foam is removed using Pre-Wash.

PPF has very high weather resistance, but basic and acidic products can cause damage, so neutral products with high stability and that minimises damage to the coating layer is required.

The coating protection function makes PPF management easier. Even if you wash your car frequently, there is less need to apply the coating every time.

Foam Bath

  • Sufficient decontamination is possible with Foam Bath only.

  • It stays attached to contaminants for a long time for easier removal.

  • Helps to remove more than 80% of contaminants before using Shampoo.

Shampoo Bath

  • A cleaner with good lubrication, does not damage wax and coating layers.

  • Helps to wash the car gently to prevent damage to surfaces caused by any remaining residue.

Detailing and Waterless Wash

Iron

  • Eliminates iron contaminants and brake dust, both of which are corrosive elements that can cause irreversible harm to your vehicle.

  • Upon application, the product rapidly interacts with iron, and its gentle formula ensures that it is safe to use on both wheels and painted surfaces.

The various elements of the detailing process are designed to remove all remaining hard contaminants such as iron, bugs, tar, oils and grease. This provides the ultimate surface for a new PPF coating, and includes a protective hydrophobic coat layer.

Bug & Tar

  • It safeguards your Paint Protection Film (PPF) by breaking down harmful contaminants such as insects, bird droppings, tree sap, and tar that can cause permanent damage.

  • The product contains a blend of proteolytic enzymes and oil-dissolving agents that rapidly break down the main components of these contaminants, allowing for easy and gentle removal.

Paint Cleanse

  • STEK Paint Cleanse is the world's first product designed for PPF decontamination.

  • It can be used after washing to remove all residues, including coatings or care products, before applying a coating.

  • It is suitable for hand application, effectively removes a narrow range of contaminants, while the polisher eliminates most existing coating layers.

OG

  • STEK OG (Oil and Grease Remover) dissolves and removes embedded sealants, waxes, polishing compounds, and other oily residues, leaving behind a pure surface.

  • Provides the cleanest and purest area to work on. Perfect product to be used before installing PPF or to clean PPF to ensure the surface is free of residue or chemicals.

No-H2O-Waterless Wash

  • An eco-friendly solution for washing your car with no water.

  • Specifically designed for scratch-resistant STEK PPF, it instantly lifts and separates contaminants.

  • By simply wiping the area with a microfibre towel, you can clean and coat the surface at once.

Coat and Maintain

UV and poor ongoing maintenance are the main reasons for PPF performance deterioration. To maximise your PPF’s performance, we recommend STEK’s Quartz Graphene.

Quartz Graphene

The ultimate in durability

STEK Quartz Graphene provides the highest level of durability available from our Ceramic Coating range. Its Graphene Technology provides strong durability along with the perfect slick, preventing contaminants from adhering to the surface.

Quartz Graphene also provides high levels of water and oil repellency, further minimising the adhesion of contaminants. All this despite it being our easiest coating to apply.